Kenmore Elite 45313 Installationsanleitung PDF herunterladen (Seite 4)

ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS

Electrical connection

It is the responsibility and obligation of the consumer to

contact a qualiﬁ ed installer to assure that the electrical

installation is adequate and is in conformance with

the National Electrical Code ANSI/NFPA No. 70-

latest edition, or with CSA Standard C22.1, Canadian

Electrical Code, Part 1, and local codes and ordinances.

WARNING

Risk of electrical shock (Failure to

heed this warning may result in electrocution or

other serious injury.) This appliance is equipped with

copper lead wire. If connection is made to aluminum

house wiring, use only connectors that are approved

for joining copper and aluminum wire in accordance

with the National Electrical Code and local code and

ordinances. When installing connectors having screws

which bear directly on the steel and/or aluminum

ﬂ exible conduit, do no tighten screws suﬃ ciently to

damage the ﬂ exible conduit. Do not over bend or

excessively distort ﬂ exible conduit to avoid separation

of convolutions en exposure of internal wires.

DO NOT ground to a gas supply pipe. DO NOT

connect to electrical power supply until appliance is

permanently grounded. Connect the ground wire before

turning on the power.

WARNING

(If your appliance is equipped with a

white neutral conductor.)

This appliance is manufactured with a white neutral

power supply and a frame connected copper wire.

The frame is grounded by connection of grounding

lead to neutral lead at the termination of the conduit,

if used in USA, in a new branch circuit installation

(1996 NEC), mobile home, recreational vehicles, where

local code do not permit grounding trough the neutral

(white) wire or in Canada, disconnect the white and

green lead from each other and use ground lead to

ground unit in accordance with local codes, connect

neutral lead to branch circuit-neutral conductor in

usual manner see Figure 6 or 7. If your appliance is

to be connected to a 3 wire grounded junction box

(US only), where local code permit connecting the

appliance-grounding conductor to the neutral (white)

see Figure 4 or 5.

NOTE TO ELECTRICIAN: The armored cable leads

supplied with the appliance are UL-recognized for

connection to larger gauge household wiring. The

insulation of the leads is rated at temperatures much

higher than temperature rating of household wiring. The

current carrying capacity of the conductor is governed

by the temperature rating of the insulation around the

wire, rather than the wire gauge alone.

Figure 5

3-WIRE GROUNDED JUNCTION BOX

36" Models with Warmer Zone

Cable from Power Supply

Black

Wires

Junction Box

Cable from appliance

Ground Wire (Bare

or Green Wire)

White Wire

(Neutral)

U.L.-Listed Conduit

Connector (or CSA listed)

Red

Wires

White Wire

(Neutral)

Where local codes permit connecting the appliance-

grounding conductor to the neutral (white) wire:

If your cooktop has a 3-wire cable to be connected to

a 3-wire grounded junction box (see ﬁ gure 4):

1. Disconnect the power supply.

2. In the circuit breaker, fuse box or junction box:

connect appliance and power supply cable wires as

shown in ﬁ gure 4.

If your cooktop has a 4-wire cable to be connected to

a 3-wire grounded junction box (see ﬁ gure 5):

1. Disconnect the power supply.

2. In the circuit breaker, fuse box or junction box:

connect appliance and power supply cable wires as

shown in ﬁ gure 5.

Figure 4

3-WIRE GROUNDED JUNCTION BOX

Cable from Power Supply

Black

Wires

Junction Box

Cable from appliance

Red

Wires

U.L.-Listed Conduit

Connector (or CSA

listed)

Ground Wire

(Bare or Green Wire)

White Wire

(Neutral)

1 2 3 4 5 6 7 8 9 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenmore Elite 45313 Installationsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Kenmore Elite 45313