Kenmore Elite Elite 5.2 cu. ft. Front-Load Washer - Metallic Silver ENERGY STAR Bedienungsanleitung PDF herunterladen

NEW Kenmore Elite Epic Capacity 5.1 cu. ft. Washer (41072/3)

and 9.0 cu. ft. Steam Dryer (9/81072/3)

FOUR SIMPLE STEPS TO HELP ENSURE A SUCCESSFUL DELIVERY.

Step 1 – Measure the Washer/Dryer Space

Carefully measure the opening where the washer & dryer will be installed. Take door, oor and wall moldings into consideration.

Note: It is important to allow 5" of extra space for venting the dryer. Also, allow 1" on all sides of both the washer and dryer to reduce noise.

Record the space

dimensions here:

Height Width Depth

Your new Kenmore Elite washer and dryer pair requires a MINIMUM AREA of 60" W x 40-" H x 37-" D to allow for proper spacing and

venting. (If you add pedestals, the minimum height is 54-¾"). Does the new laundry pair t your current space?

width height depth depth (dooropen) height (withpedestal) width of pair

Washer

29" o ts 40-" o ts 32-" o ts 57" o ts 54-¾" o ts

(side by side installation)

60" o ts

Dryer

29" o ts 40-" o ts 32-" o ts 57" o ts 54-¾" o ts

Step 2 – Walk the Delivery Path

■ Starting at the point where the washer and dryer will be unloaded from the delivery truck, walk the path the machines will take from there

to the laundry room.

■ Measure every gate, doorway, corner, stairway, and any other narrow place in the delivery path.

■ Check the measuring hints in Step 3 to make sure you don’t miss any obstructions.

Step 3 – Measure Possible Obstructions

Measure the opening of any gates, arbor, etc. to make sure it is at least as wide as the washer and/or dryer.

Doors:

■ Open the door and measure the distance

from the edge of the door to the door

jamb.

■ With the door open, measure from jamb

to jamb.

■ Measure the screen door from frame

to frame if it is narrower than the door

jambs.

■ If your screen door has a closer and/

or a latch, measure from the latch to the

closer bracket.

Halls & Corners:

■ Measure the narrowest spots in hallways.

Look for items mounted on walls, such

as shelves, that might make the passage

narrower.

■ Measure corners, such as stairway

landings. If both sides of a corner are

narrow, you may not be able to make the

turn with the appliance.

Record the narrowest

hallway/doorway/gate

measurement here:

Step 4 – Prepare for a Smooth Installation

■ If the doorway is too narrow and the door cannot be opened fully, remove the door. Fixed pin hinges will need to be unscrewed to remove

the door.

■ Handrails may have to be removed from narrow stairs.

■ If the space is not deep enough for the appliances PLUS a dryer duct, you may need to use special venting components. Ask your sales

associate for more information.

SC021308

You found the Kenmore Elite

washer and

dryer that t your lifestyle – now make

sure they t your space. These Kenmore

Elite models are larger than typical

front load washers and dryers, so use

this guide to ensure your purchase can be

successfully delivered and installed.

walk the path

laundry installation guide

(side by side installation) 1

Inhaltsverzeichnis

Seite 1 - (side by side installation)

NEW Kenmore Elite Epic Capacity 5.1 cu. ft. Washer (41072/3) and 9.0 cu. ft. Steam Dryer (9/81072/3)FOUR SIMPLE STEPS TO HELP ENSURE A SUCCESSFUL DELI

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenmore Elite Elite 5.2 cu. ft. Front-Load Washer - Metallic Silver ENERGY STAR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein Kenmore Elite Elite 5.2 cu. ft. Front-Load Washer - Metallic Silver ENERGY STAR herunter. Kenmore Elite 41072 Malay Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Kenmore Elite Elite 5.2 cu. ft. Front-Load Washer - Metallic Silver ENERGY STAR